Description

The Brushed stainless horn holder bracket by Two Hands Motorcycles moves your horn underneath the tank and better integrates it into the overall appearance of your custom motorcycle. By fitting it to the side position you also keep your horn out away from road grime and dirt etc. Used in combination with the front turn signal bracket and regulator/rectifier bracket.Brushed stainless.Suits:*Triumph Bonneville/Thruxton (2001-2015) – Air Cooled models*Triumph Scrambler (2006-2015) – Air Cooled modelsFeatures:Discreet mounting of the horn for a tidy front-end conversionHigh-quality stainless steel for enhanced durabilityCompatible with the original hornNo cable extensions necessaryAvailable in a brushed stainless finish or black finishAssembly: Made to be a Plug and Play part makes for a quick and simple fit up. First, the nut on the upper, frontal engine holder is loosened and the bolt is removed. The horn holder by Two Hands Motorcycles is then mounted in reverse order on the left or right side and tightly fastened.Now ensure the holder is in the desired position and re-tighten the nut at a torque of 80 Nm. Finally, the horn is attached to the horn holder and the cables are connected. Ensure wires are routed in a manner to avoid problems and re insulate if necessary.Note:Also see our Triumph build kits for “SETS” that include this horn bracket. And also see the regulator brackets which are often used at the same time.