Description

DAYTONA HIGH SPEC BRAKE LINE STAINLESS (800mm), DOT MARKED,(TYPE:D SPEC), 60594.The HIGH SPEC line by DAYTONA are a stainless line with a neoprene outer to resist the elements (oil, sun, water etc.), banjo ends are steel. The lines are DOT marked and tested and pass and exceed the FMWS.106 (Federal safety std). Suits universal use on a range of models. Made in Japan to the highest standards.DETAILS:-> Banjo material: Steel-> Banjo thickness: 8mm-> Inner hose layer: Teflon-> The hose banjo fitting is crimped to guarantee sealing, safety and performance.-> Please use with the correct size banjo bolts, we recommendGOODRIDGE banjo bolts (sold separately)-> Made in Japan to the highest standards by Nichirin (the manufacturers of brake lines for the best known Japanese motorcycle and automotive makes).USAGE EXAMPLES:SR400/500 use:(incl. some XS650), Can be used on early model bikes with factory LHS caliper and factory type MC. this brake line is shorter than the standard length SR400/500 line (used on the early model with high / wide factory bars) and is often used with drag bars, UK bars or other low custom bars.For repair or upgrade, or use with custom builds requiring this length line. Note, the early model SR master cylinder banjo position differs to late model type MC’s, if you have changed master cylinders consider if the D type or A type suits best -(always measure to ensure suitability with your chosen bars).W650 Use:This line is -200mm (short) compared to the(EARLY) model with HIGH bars (which has a1000mm (D) type line).Use this line on theW650high barmodel as an upgrade or replacement when changing bars to a different spec. When used on theLOW Bar model this line is -50mm shorter compared to thefactory low barbrake line (which is 800mm). Use when fitting drag bars or UK type bars that are lower than the factorylow bars. Often used on the W800 and W400 when fitting custom bars. *Alwayscheck length to ensure suitability.Hose type:Two types of lines are available (A spec & D spec). The spec type refers to thebanjo fitting angle in relation to each end.Lines are available in 50 mm increments and are set from 600 mm to 1100 mm tofit a wide range of models.-> Type A: Banjo 21 & straightBanjo – (no turn, banjo faces thesame direction at each end)-> Type D: Banjo 21 & straightBanjo -(with a 90 turn compared to theother end)NOTE:Alwaysuse new gaskets (washers) when fitting this line, andalwaysensure the banjo bolt is compatible with the line fittings. Changing any component on your brake system requires a very high level of experience and skill. This line shouldonlybe fitted by a licensedqualified mechanic in licensed workshop. The brake system will require bleeding before use, bleeding of the system should only be carried out by qualified mechanics.Daytona Japan (Daytona Corporation) has been a leader in motorcycle parts industry since 1972. Daytona provides original and customized motorcycle parts and accessories throughout Japan and to the international marketplace. Daytonas specialty is R&D to develop original motorcycle parts and accessories which meet the demand in the highly competitive Japanese motorcycle industry and abroad.