Description

Stock brake pads on the 2013-2019 Explorer 3.5L EcoBoost 4WD were sized for factory tire diameters and everyday driving loads. Swap to EBC’s ED+ Extra-Duty rear pads and the system gains the friction and heat capacity it actually needs when the truck is loaded, towing, or running larger-diameter tires.Higher friction where it counts. The ED+ compound delivers elevated friction coefficients compared to standard replacement pads, which means the caliper reaches the same stopping force at lower pedal pressure. That translates directly to a firmer, more confident brake pedal feel under hard deceleration.Built to handle heat, not just temperature spikes. EBC formulates the ED+ compound from aramid fibers and a minimal steel fiber content, giving the pad a high fade-resistance ceiling. The material stays stable deep into heavy braking events, so response remains consistent whether the truck is stopping cold on a highway on-ramp or repeatedly hauling speed from a loaded trailer pull.Made entirely in the UK. Every ED+ pad comes out of EBC’s own UK manufacturing facility, where the compound mixing, molding, and quality checks happen under one roof. The aramid-based formula is also gentler on rotors than metallic compounds, and wheel dust stays minimal so cleanup between washes is easier.A cost-effective first step. Before investing in larger rotors or a big brake kit, a premium pad upgrade often closes the gap between stock performance and the friction level a heavier or larger-tired truck actually demands. The ED+ pads address the root issue: insufficient friction for the load, without requiring any hardware changes beyond the pads themselves.Product BenefitsRear Fitment: Engineered specifically for the rear axle of the 2013-2019 Explorer 3.5L EcoBoost 4WD.ED+ Compound: Higher friction and heat capacity than standard replacement pads for demanding use cases.Aramid Fiber Construction: Made with aramid and minimal steel fiber, kind to rotors and low on dust.UK Manufactured: Produced 100% in EBC’s own factory under strict quality controls.Fade Resistant: Compound stability tested at elevated temperatures for consistent performance under repeated hard stops.Bolt-On Upgrade: Fits factory calipers and hardware with no bracket modifications required.Rotor Friendly: Lower abrasiveness than metallic pads extends rotor service life.About EBC Brakes: EBC Brakes has manufactured friction products in the United Kingdom for decades, covering passenger cars, trucks, motorcycles, and off-road vehicles. The brand is known for compound development across a wide range of duty cycles, from street commuting to track and towing applications, and produces its pads entirely within its own UK factory.