Description

DAYTONA HIGH SPEC BRAKE LINE, STAINLESS (700mm), DOT MARKED, (TYPE: A SPEC), PART #60572.The 700mm long HIGH SPEC line by DAYTONA is a stainless mesh line with a neoprene outer to resist the elements (oil, sun, water etc.). Banjo ends are steel. The lines are DOT marked and tested, they pass and exceed the FMWS.106 (Federal safety Standard) and it conforms to all JIS and ISO standards. Suits universal use on a range of models. Made in Japan to the highest standards. This line is the go-to for the SR400/500 for clip on bars on (late model with RHS caliper) and early model with RHS caliper conversions!For repair, upgrade, or use with custom builds requiring this length line.DETAILS:-> Banjo material: Steel-> Banjo thickness: 8mm-> Inner hose layer: Teflon-> The hose banjo fitting is crimped to guarantee sealing, safety and performance.-> Please use with the correct size banjo bolts, we recommendGOODRIDGE banjo bolts (sold separately)-> Made in JapanUSAGE EXAMPLES:SR400 use: This particular line suits the factory late model SR400 master cylinder and RHS caliper (as well as many other models). For the SR400 it fits all late model (01~18) SR400/SR400Fi with RHS caliper. This brake line is the equivalent to -100mm (short) compared to the standard SR400 brake line and is suitable for use on SR400 and SR400FI using clip on bars. Line can also be used on the SR500 where a RHS calliper conversion is done, and the M/C suits line banjo angles.Hose type:Two types of lines are available (A spec & D spec). The spec type refers to thebanjo fitting angle in relation to each end.Lines are available in 50 mm increments and are set from 600 mm to 1100 mm tofit a wide range of models.-> Type A: Banjo 21 & straightBanjo – (no turn, banjo faces thesame direction at each end)-> Type D: Banjo 21 & straightBanjo -(with a 90 turn compared to theother end)NOTE: Always use new gaskets (washers) when fitting this line and always ensure the banjo bolt is compatible with the line fittings. Changing any component on your brake system requires a very high level of experience and skill. This line should only be fitted by a licensedqualified mechanic in licensed workshop. The brake system will require bleeding before use; bleeding of the system should only be carried out by qualified mechanics.Daytona Japan (Daytona Corporation) has been a leader in motorcycle parts industry since 1972. Daytona provides original and customized motorcycle parts and accessories throughout Japan and to the international marketplace. Daytonas specialty is R&D to develop original motorcycle parts and accessories which meet the demand in the highly competitive Japanese motorcycle industry and abroad.